Advertisement

Quick Links

Installation Instructions
CS1112 E
CS1122 E
en - CA
Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation instructions.

Advertisement

Table of Contents
loading

Summary of Contents for Miele CS1112 E

  • Page 1 Installation Instructions CS1112 E CS1122 E en - CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Children WARNING- When using your Children should not be left appliance follow basic unattended in an area where the precautions, including the appliance is in use. Never allow following: children to sit or stand on any part of the appliance.
  • Page 3 Install the appliance so that the power cord does not come into contact Installation, repair and maintenance with any portion of the cooktop which work should be performed by a Miele may become hot during use. authorized service technician. Work by unqualified persons could be Before servicing, disconnect the dangerous and may void the warranty.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS Do not cook on a broken cooktop. Do not store items on the appliance Any breakages or cracks in the ceramic when not in use. Items could melt or surface of the appliance are defects catch fire from residual heat or if the and must be treated as such.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS Use the proper pan size. Select To prevent burns and breathing cookware with flat bottoms large difficulty, allow the cooktop to cool enough to cover the heating element. before cleaning. Some cleaners may Using undersized cookware will expose produce toxic fumes if applied to a hot a portion of the heating element and surface.
  • Page 6: Safety Instructions For Installation

    The minimum distances given in installation in these applications. Please these Installation Instructions must contact the Miele Technical Service be observed in order to ensure safe Department with specific requirements. operation. Failure to do so increases Do not install this appliance above the risk of fire.
  • Page 7 SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances above the If there is more than one appliance appliance beneath a hood (e.g. wok burner and electric cooktop), and they have different minimum safety distances always observe the greater distance. The minimum safety distance given by the hood manufacturer must be maintained between the cooktop and the hood above it.
  • Page 8 SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while 2 " (50 mm) maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard.
  • Page 9: Installation

    Installation Safety distance when installing the appliance near a wall with trim or a back splash A minimum distance of 2" (50 mm) between the trim or back splash and the countertop cut-out if required. This distance is only necessary if these items are made of combustible materials e.g.
  • Page 10 Installation Installation dimensions CS 1112 a Spring clips b Appliance front c Installation height d Power supply box with connection cable, L = 78 " (2000 mm)
  • Page 11 Installation CS 1122 a Spring clips b Appliance front c Installation height d Power supply box with connection cable, L = 78 " (2000 mm)
  • Page 12 Installation Cut out If during installation the seal around ^ Make the worktop cut-out for one or the frame does not sit flush with the more appliances as applicable. countertop in the corners, the corner Remember to maintain a minimum radius, maximum "...
  • Page 13: Installation Of Multiple Appliances

    Installation Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out Countertop cut-out two appliances three appliances 6 " 6 " For the installation of two appliances For the installation of three appliances the width of the countertop cut-out D is the width of the countertop cut-out D is...
  • Page 14 Installation Sample calculations for a countertop cut-out for three appliances appliance width appliance width appliance width Countertop minus " (8 mm) minus " (8 mm) cut-out 11" " 11" " (280 mm) (280 mm) (848 mm) (288 mm) 11" 15" "...
  • Page 15 Installation " 3 / 1 6 1 " - 1 0 m m ( 2 5 - 3 2 " 2 " ( 5 0 m ( 5 0 m 2 " 2 " " 3 / 1 6 ( 5 0 m ( 5 0 m 6 "...
  • Page 16: Attach The Spring Clips And Support Bars

    Installation Attach the spring clips and support bars Wood or solid surface countertops Granite countertop " 3 / 1 6 " 3 / 1 6 1 " - 1 1 " - 1 0 m m ( 2 5 - 3 0 m m ( 2 5 - 3 ^ Position and attach the spring clips...
  • Page 17 Installation ^ Coat the edges of the spring clips a, ^ and the space d between the strips b and the countertop with silicone (supplied).
  • Page 18 Installation Installing the appliance ^ Feed the power cord down through the cut-out. ^ Then place the front side of the appliance in the countertop cut-out. ^ Then with a hand on each side of the appliance press down evenly on the edges until it clicks into position.
  • Page 19: Tiled Surfaces

    Installation Sealing Tiled surfaces The grouting a and shaded area under The appliance must not be permanently sealed into the countertop when the appliance frame must be flat and installed. The sealing strip under the even, so that the frame will lie evenly edge of the appliance provides a and the sealing strip under the edge of sufficient seal for the countertop.
  • Page 20: Electrical Connection

    Electrical connection Power supply CAUTION: Before installation or ^ Be sure your electrical supply servicing, disconnect the power matches the data plate. supply by either removing the fuse, shutting off the main power supply The combiset is equipped with a or manually "tripping"...
  • Page 21 Alteration rights reserved / 4608 M.-Nr. 07 342 630 / 00 M.-Nr. 07 342 630 / 00 For the most updated manual see the Miele web site.

This manual is also suitable for:

Cs1122 e

Table of Contents