Miele CS1122E Operating And Installation Instructions
Ceramic combiset
Hide thumbs
Also See for CS1122E:
- Operating and installation instructions (40 pages) ,
- Installation instructions manual (22 pages)
Related Manuals for Miele CS1122E
Summary of Contents for Miele CS1122E
- Page 1 Operating and Installation Instructions Ceramic Combiset CS 1112 CS 1122 en - US To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 07 346 400...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 3 Description of the combiset ......... 7 CS 1112 . -
Page 3: Important Safety Instructions
WARNING- When using your appliance follow basic precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. Keep these operating instructions in a safe place and pass them on to any future user. - Page 4 IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Be sure your appliance is properly installed and grounded by a qualified technician.
- Page 5 Safety DO NOT TOUCH THE COOKING AREA OR THE VICINITY AROUND THE COOKING AREA - During operation, the cooking area and its surroundings will get hot and can cause burns. When the combiset is shut off, the surface may remain hot enough to cause harm although the glow is not visible through the dark glass.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Be careful not to drop anything on the ceramic surface of the combiset. Even lightweight objects may cause damage. Use the proper pan size. Select cookware with flat bottoms large enough to cover the heating element. Using undersized cookware will expose a portion of the heating element and may result in ignition of clothing or handles becoming hot.
-
Page 7: Description Of The Combiset
CS 1112 Variable burner : C 4" or 7" (100 mm or 180 mm) - Power: 700 W or 1800 W Standard burner : " (145 mm) - Power: 1200 W Burner indicators Display Description of the combiset Control knobs for the burners: Standard burner (front) Variable burner (rear) Indicators... - Page 8 Description of the combiset CS 1122 Extended burner C 7" or 7" x 10 " (180 mm or 180 mm x 265 mm) - Power: 1500 W / 2400 W Standard burner " (145 mm) - Power: 1200 W Burner indicators Display Control knobs for the burners: Standard burner (front)
-
Page 9: Before Using For The First Time
Clean the combiset ^ Before using for the first time, clean the appliance with a damp cloth and dry with a soft cloth. Do not use liquid dish soap to clean the combiset, this may cause permanent blue discolorations. Before using for the first time Heat the combiset Metal components of the appliance have a protective coating which may... -
Page 10: How The Burners Work
How the burners work One-ring burners use one heating strip, and two-ring burners and grill zones use two heating strips. Depending on the model, the heating strips may be separated by a certain distance. See the illustrations. Every burner is equipped with overheat protection (inside temperature limiter), to prevent the glass ceramic combiset from overheating (see the section on... -
Page 11: Use
Turning a burner On/Off ^ To turn a burner on, press the control knob down and turn it clockwise to the desired setting. ^ To turn a burner off, turn the control knob counterclockwise Do not turn a burner on without pressing the control knob down, and do not turn the knob past "12"... -
Page 12: Residual Heat Indicator
Residual Heat Indicator When a cooking zone is switched on, the On/Off indicator will light followed by the residual heat indicator. When the cooking zone is switched off, the On/Off indicator goes out. The residual heat indicator will turn off once the cooking zone is safe to the touch. -
Page 13: Settings
Settings Use for Melt butter, chocolate, etc. Dissolving gelatine Prepare yogurt Warming small quantities of food/liquid Keeping delicate dishes warm Cooking rice, Thawing frozen vegetables Warming liquid or half-set foods Thickening sauces, e.g., hollandaise sauce Cooking rice pudding Defrosting frozen foods Steaming vegetables, fish, etc. -
Page 14: Overheat Protection
Overheat protection Each cooking zone is equipped with a temperature limiter. This feature automatically turns off the heating element before the glass ceramic becomes too hot. Once the ceramic surface has cooled to a safe temperature the heating element will automatically turn back on. -
Page 15: Selecting Cookware
Following these tips will allow you to make the most of your ceramic combiset. The cooking surface The ceramic combiset is made of an extremely hard and durable material. The surface is scratch resistant, not scratch proof. Avoid using cookware with ridged bottoms. - Page 16 Selecting cookware Copper bottom and aluminum pans may leave a residue on the combiset in the form of metallic lines. This is normal. These lines can be removed using a non-abrasive ceramic combiset cleaner or a shielded scraper blade. Be sure to clean the combiset after each use.
-
Page 17: Cleaning And Care
Stubborn soiling is best removed with a shielded scraper blade. ^ Apply a ceramic cleaner (available from Miele) using a soft cloth or paper towel. ^ To remove any limescale deposits or metallic residue apply a ceramic cleaner using a soft cloth or use a shielded scraper blade if necessary. -
Page 18: Stainless Steel
Soak baked or hardened spills first to loosen them. Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner (available from Miele). To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure. -
Page 19: Frequently Asked Questions
"12". When the knob is sitting between "12" and "0" the appliance operates at reduced power. Frequently asked questions Solution Check whether a fuse is blown. If the problem persists contact Miele. Solution See "Overheating protection". Solution Turn the control knob exactly to "12". -
Page 20: Technical Service
Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. - Page 21 Miele Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.
-
Page 23: Installation Instructions
Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and appliance damage read these instructions before installation or use. -
Page 24: Important Installation Safety Instructions
However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements. Do not install this appliance above an oven unless the countertop is at least 1 "... -
Page 25: Safety Distances Above The Appliance
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the combiset and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the combiset (e.g. - Page 26 IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. A distance of at least 2"...
-
Page 27: Installation
Safety distance from the wall covering If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out and the covering, since high temperatures can damage these materials. If the covering is made of a combustible material (such as wood), the distance between the countertop cut-out and the wall covering must be a minimum of 2"... -
Page 28: Installation Dimensions Cs 1112
Installation Installation dimensions CS 1112 Spring clips Appliance front Installation height Power supply box with connection cable, L = 78 3/4" (2000 mm) Rating label... -
Page 29: Installation Dimensions Cs 1122
Installation Installation dimensions CS 1122 Spring clips Appliance front Installation height Power supply box with connection cable, L = 78 3/4" (2000 mm) Rating label... - Page 30 Installation Cut out ^ Make the countertop cut-out for the desired number of appliances. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the left or right of the combiset.
-
Page 31: Installation Of Multiple Appliances
Installation of multiple appliances When installing more than one combiset appliance, a support bar installed between the appliances. Countertop cut-out two appliances For the installation of two appliances the width of the countertop cut-out D is the sum of A and C. A, B and C = appliance width 11 5/16", 15"... - Page 32 Installation Sample calculations for a countertop cut-out for three appliances appliance width appliance width minus 5/16" (8 mm) 11" (280 mm) 11 5/16" (288 mm) 11" (280 mm) 15" (380 mm) 11" (280 mm) 22 11/16" (576 mm) 14 5/8" (372 mm) 11 5/16" (288 mm) 14 5/8"...
- Page 33 Spring clips Support bars Space between support bar and countertop Sealing strip The illustration represents the attachment of spring clips for 3 appliances. An additional support bar is required for each additional appliance. The position for attachment of an additional support bar depends on the width of appliance B. Installation and support bars...
-
Page 34: Attach The Spring Clips And Support Bars
Installation Attach the spring clips and support bars Wood or solid surface countertops ^ Place the supplied spring clips and the support bars marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the "... - Page 35 Granite countertop The screws are not needed for granite countertops. ^ Position and attach the spring clips and support bars double-sided tape ^ Coat the edges of the spring clips ^ and the space support bars with silicone (supplied). with strong, Installation between the and the countertop...
- Page 36 Installation Installing the appliance / appliances ^ Feed the power cord down through the cut-out. ^ Place the front edge of the appliance into the cut-out. ^ With a hand on each side of the appliance press down evenly on the edges until it clicks into position.
-
Page 37: Sealing
Sealing The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service. -
Page 38: Electrical Connection
Electrical connection CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the main power or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. -
Page 39: Help Protect Our Environment
Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Help protect our environment Disposal of an old appliance Old appliances contain materials that can be recycled. - Page 40 Alteration rights reserved / 4509 M.-Nr. 07 346 400 / 03 M.-Nr. 07 346 400 / 03 For the most updated manual see the Miele web site.