Adjusting the stops in dependence of the torque..................15 Mounting examples ............................16 4.5.1 Fastening elements..........................16 4.5.2 Mounting with lever ..........................16 Dimensioned drawings ..........................17 4.6.1 Lever for RHDE8000..........................17 4.6.2 Lever for RHDE16000...........................19 Electrical connection ............................21 Cable shield..............................22 42/68-168-EN RHDE8000 ... 16000 (Contrac)
Page 4
Trouble shooting ...............................32 Electrical test values.............................32 Technical data..............................33 General information............................33 Technical data RHDE8000...........................33 Technical data RHDE16000.........................34 Technical data for the cable set (for Ex-relevant range) ................35 10 Appendix ................................36 10.1 Permits and certifications ..........................36 11 Index ...................................48 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Pos: 4.5 /Sicherheit/Allgemein/Hinweis zur bestimmungswidrigren Verwendung (Wartung/Reparatur) @ 0\mod_1129707002440_3101.doc @ 3240 Repairs, alterations and enhancements or the installation of replacement parts is only permissible as far as described in the manual. Further actions must be verified with ABB Automation Products GmbH. Excluded from this are repairs performed by ABB-authorized specialist shops.
Important The symbol indicates operator tips or especially useful information. This is not a message for a dangerous or damaging situation. Pos: 4.11 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
The installation, commissioning and maintenance of the device may only be carried out through trained specialist personell authorized by the plant operator. The specialist personnel must have read and understood the manual and comply with its instructions. Pos: 4.16 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 42/68-168-EN RHDE8000 ... 16000 (Contrac)
WEEE directive 2002/96/EC. Proper disposal prevents negative effects on people and the environment, and supports the reuse of valuable raw materials. If it is not possible to dispose of old equipment properly, ABB Service can accept and dispose of returns for a fee.
(option) when working on the actuator or related subassemblies and take precautions to prevent unintentional switch-on. • Make sure that any oil leaking from the device cannot come into contact with hot parts Pos: 5 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Due to potential unallowed charging of the housing, the effects of high voltage sources on the equipment must be prevented. Important Clean coated surfaces with a damp towel. Pos: 7 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 42/68-168-EN RHDE8000 ... 16000 (Contrac)
(anti-condensation heater, optional) Motor with temperature sensor Sensor electronic unit Actuator sensor Motor connection area Gearing Contrac actuator in explosion-proof design M00190 Fig. 2: Ex design Pos: 10 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Pos: 11.4 /Überschriften/1.1/1-spaltig/D - F/Einbaulage @ 3\mod_1158651041937_3101.doc @ 41702 Mounting position Pos: 11.5 /Montage/Aktorik/Elektr. Schwenkantriebe/RHDE8000...16000/Einbaulage Zeichnung @ 11\mod_1185795158406_3101.doc @ 112171 The spur gears of the actuator are oil lubricated. They contain the max. oil quantity when leaving the manufacturer. Once the actuator is installed replace the uppermost check plug by the separately supplied venting plug.
• Avoid direct exposure to rain, snow and other environmental influences. • RHDE8000 and RHDE16000 actuators must be mounted on a level, vibration-free or vibration-dampening and torsionally rigid support. • Spring couplings or vibration absorbers in the coupling rod may cause additional load. The drive elements (lever, coupling rod) may not cause additional vibration loadings, which exceed the rated torque more than twice.
4. Turn the coupling tube or slightly shift the limit stops to get a small gap between lever and limit stop. 5. The procedure and gap size depend on the stiffness of the linkage arrangement. 6. Tighten the counter-nuts and limit stop screws. Pos: 11.16 /Überschriften/1.1/1-spaltig/M - O/Montagebeispiel @ 10\mod_1181637256390_3101.doc @ 103672 42/68-168-EN RHDE8000 ... 16000 (Contrac)
Page 18
Connection pipe 3” DIN 2440 size resp. 3” schedule 80 pipe “L” Pointing away from the actuator: max. 10° acc. to requirements. The pipe is not included in shipment. Pos: 11.24 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Pointing towards the actuator: max. 3° Connection pipe 3” DIN 2440 resp. 3” schedule 80 pipe size “L” Pointing away from the actuator: max. 10° acc. to requirements. The pipe is not included in shipment. 42/68-168-EN RHDE8000 ... 16000 (Contrac)
Page 20
Connection pipe 3” DIN 2440 resp. 3” schedule 80 pipe size “L” Pointing away from the actuator: max. 10° acc. to requirements. The pipe is not included in shipment. Pos: 12 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
• Use a certified cut-off unit for the thermal motor monitoring. Permitted units are, e.g.: - ABB motor temperature monitoring unit SD241-B - 3 RN 1011-1 CK 00 , Ex II (2) GD , PTB 01 ATEX 3218, Siemens Pos: 13.3 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 42/68-168-EN RHDE8000 ...
Pos: 13.7 /Überschriften/1.1.1/1-spaltig/Motor @ 10\mod_1182501159359_3101.doc @ 108596 5.1.2 Motor Pos: 13.8 /Elektrischer Anschluss/Aktorik/Antriebe/Allgemein/Kabelschirm Motor @ 10\mod_1182501238328_3101.doc @ 108619 The cable shield must be connected to the motor in a proper manner. Pos: 13.9 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Pos: 13.13 /Elektrischer Anschluss/Aktorik/Antriebe/Allgemein/Elektrischer Anschluss Leistungselektronik EBN853 (EX) @ 10\mod_1182165664453_3101.doc @ 107576 Important The electrical connection is provided by terminals on the actuator and on the electronic unit. Fig. 10: Electrical connection: Ex actuator analog / digital 42/68-168-EN RHDE8000 ... 16000 (Contrac)
The electrical connection is provided by terminals on the actuator and on the electronic unit. Fig. 12: Electrical connection: Ex actuator analog / digital Important * For separate heat supply, protect the heater with 2 … max. 6 A medium time-lag fuses (e.g., Neozed D01CE14). 42/68-168-EN RHDE8000 ... 16000 (Contrac)
Page 26
Fig. 13: Electrical connection: PROFIBUS DP option Important * For separate heat supply, protect the heater with 2 … max. 6 A medium time-lag fuses (e.g., Neozed D01CE14). Pos: 13.18 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Fig. 14: Electrical connection: Ex actuator analog / digital Important * For separate heat supply, protect the heater with 2 … max. 6 A medium time-lag fuses (e.g., Neozed D01CE14). Pos: 14 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 42/68-168-EN RHDE8000 ... 16000 (Contrac)
Remove the cotter pin. Press the hand wheel lock. Turn the handwheel to move the part-turn actuator to the desired position. Release the lock. Insert the cotter pin. Pos: 16 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Pos: 17.3 /Überschriften/1.1/1-spaltig/G - I/Inspektion und Überholung @ 10\mod_1181642170921_3101.doc @ 103840 Inspection and overhaul Pos: 17.4 /Wartung / Reparatur/Aktorik/Antriebe/Elektr. Schwenkantriebe/RHDE8000...16000/Inspektion und Überholung @ 12\mod_1190008365625_3101.doc @ 121673 • Only use genuine spare parts such as ball bearings, gaskets and oil may be used to overhaul the actuators.
Motor BD 112 M 4-B Sensors Position and temperature sensor always available Data sheet EBN861: 10/68-8 22 Data sheet EBS862: 10/68-8 25 Data sheet SD241B: 10/68-8.30 Pos: 21.9 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 RHDE8000 ... 16000 (Contrac) 42/68-168-EN...
Ex II 2G/D, Ex e II Ex II 2G/D, Ex e II Important If the specified cable harness does not meet all safety-relevant requirements, the proper installation material must be used. Pos: 22 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 42/68-168-EN RHDE8000 ... 16000 (Contrac)
CE mark on the nameplate of actuator. − Conforms with EMC directive 89/336/EWG. − Conforms with the machinery directive 2006/42/EC. By placing the CE mark on its devices, ABB Automation Products GmbH declares its conformance with these directives. Ex approvals The symbol indicates devices with an ignition-proof design.
Page 47
Which substances have had contact with the device? We hereby certify that the devices/parts shipped were cleaned and are free from any dangerous or poisonous materials. City, Date Signature and company stamp Pos: 24 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 42/68-168-EN RHDE8000 ... 16000 (Contrac)