Setting The Sleep Timer; Setting Display Brightness - LG Aerotower lite FS15GP Series Owner's Manual

28 USING

Setting the Sleep Timer

You can set the product to turn off after operating
for the desired period of time.
Press the Standby On/Off button to turn the
1
product on.
Press the Sleep Timer button to set the
2
desired period of time.
• When you press the button during product
operation, the setting will change in the
order of 1H(Turn Off 1 Hour Later)
~ 12H(Turn Off 12 Hours Later) →
Cancel(OF).
NOTE
• When the sleep timer is set, the product will
operate with level 1 for display brightness
and rotation stops. (However, if the display
brightness is set to Off before the sleep timer is
set, the screen brightness will remain OFF.)
• When the sleep timer is set, the fan speed will
be adjusted to Sleep which is the lowest fan
speed, and after a set period of time, the fan
speed will be adjusted automatically according
to the air quality. (Noise levels may change
according to the fan speed.)
• You can change the fan speed, display
brightness, and rotation even while the sleep
timer is set.
• When the sleep timer is set, press the Sleep
Timer button on the remote controller once
again to cancel the sleep timer.

Setting Display Brightness

You can adjust the display brightness of the
status display.
Press the Standby On/Off button to turn the
1
product on.
Press and hold the Sleep Timer button on the
2
remote controller for 2 seconds.
• When you press the button during product
operation, the display brightness will
change in the order of 3 (bright) → 2
(medium) → 1 (dim)→ Off(OF).
NOTE
• If you press the button while the display
brightness is set to Off, the screen brightness
will be set to 1 (dim) for a moment and then the
screen will turn off.
SG