Parts And Controls; Before Using Your Appliance For The First Time; Making Tea - Bosch TTA22 Series Instruction Manual

en
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.

Parts and controls

Fig. 1
1 Base
2 Kettle with water level indicator
3 Calcification filter (detachable)
4 Teapot (dishwasher-safe)
5 Tea filter (dishwasher-safe)
6 Lid for teapot (dishwasher-safe)
7 Lid (bayonet lock)
8 Selection button
(boil E / keep warm F)
9 Indicator light
10 On/Off switch
11 Illuminated ring
12 Cord store
Important:
– Use kettle only with base which is marked
with type WK5.
– Fill the kettle with water only. Milk or
instant products will burn and damage the
appliance.
– Do not operate the kettle without water
or overfill, observe min and max marks
(Fig. 5a).
– Use the kettle with attached teapot or lid
only, otherwise the kettle will not switch
automatically to keep warm F.
– If the kettle is not being used, always
switch off with the switch or unplug.
Before using your appliance
for the first time
■ Unwind the power cord to the required
length and plug in.
■ Fill the kettle with fresh water, attach the
lid and place on the base.
■ Switch on the appliance by pressing
down switch (Fig. 2).
■ Set the selection button to boil E (Fig. 3).
■ When the water has boiled, the selection
button automatically switches to
keep warm F (Fig. 4).
10
Info: The illuminated ring comes on while
the water is boiling and goes out as soon
as the water has boiled. The indicator light
comes on during the warming function only.
■ Repeat the process twice in order to
clean the kettle.
■ Rinse the teapot with lid and tea filter.

Making tea

Fig. 5
The preparation of Turkish tea is described
here. Other types of tea may become bitter
due to the long steeping time.
■ Fill the kettle with water, observe min and
max mark.
■ Place the kettle on the base and set the
selection button to boil E.
■ Fill the tea filter approx. ⅓ full of Turkish
tea and insert into the teapot.
■ Place the teapot on the kettle. Switch on
the appliance by pressing down switch.
The illuminated ring lights up.
■ As soon as the water has boiled, the
selection button automatically switches
to keep warm F. The indicator light
lights up.
■ Now fill the teapot with the hot water and
refill the kettle with fresh water.
■ Place the teapot on the kettle and the
kettle on the base. Set the selection
switch to boil E.
■ As soon as the water has boiled, the
selection button automatically switches to
keep warm F.
■ Now the tea from the teapot can be
mixed with the hot water from the kettle
according to taste.
When pouring out tea, press the teapot
lid forwards with your thumb.
Info: The water and the tea are kept warm
by setting the switch to F. This saves up to
90% energy. If the kettle is refilled with fresh
water, first bring the water to the boil and
then keep warm.