Bosch XDK110 Quick Start Manual page 11

!
1.2.5 Console
Picture 16: Console view
The Console tab shows an overview of the status of the Workbench, allows sending data to the XDK and
shows output coming from the XDK via USB. Buttons are available on the upper right side of the tile,
depending on the current status. These buttons contain functions like "go to next error", "clear console", etc.
There are two additional tabs. "Progress" shows the current status of e.g. flashing.
Picture 17: Progress bar
!
You can cancel the operation by clicking on the red button on the right side of the progress bar.
The "Problems" tab displays existing problems detected by the XDK Workbench.
Picture 18: Problems view
!
XDK110
© Bosch Connected Devices and Solutions GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as
copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
Workbench First Steps Guide XDK110
!
Page ! 1 1
BCDS