Table of Contents
Advertisement
Added steam
When you cook with added steam, the appliance intro-
duces steam into the cooking compartment at various
intervals. This gives your food a crispy crust and a
shiny surface. Meat stays juicy and tender, and only un-
dergoes a minimum reduction in volume.
You can combine added steam with the following
functions:
¡ Types of heating → Page 13
– 4D hot air
– Top/bottom heating
– Circulated air grilling
– Keeping warm
¡ → "Dishes", Page 21
¡ → "Meat probe", Page 19
Steam jet
You can use the steam jet function to specifically add
intensive steam at various intervals. This makes bread
and bread rolls in particular wonderfully crispy and
gives them a golden colour.
The appliance adds clouds of steam to the cooking
compartment for approx. 3 to 5 minutes. Depending on
the operation, you can activate the steam jet several
times.
You can add the steam jet for the following functions:
¡ Types of heating → Page 13
– 4D hot air
– Top/bottom heating
– Circulated air grilling
¡ → "Meat probe", Page 19
Note: Only use the steam jet when cooking compart-
ment temperatures are above 120 °C.
11.3 Setting added steam
Requirements
¡ Observe the information about the respective operat-
ing mode.
→ "Setting options with steam", Page 16
¡ The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. The appliance continues to operate but without
injecting steam into the cooking compartment.
→ "Filling the water tank", Page 16
Press the operating mode that you require in the
1.
menu.
Select the settings for the operating mode, e.g. type
2.
of heating and temperature.
Press
"Added steam".
3.
Use the setting ring to set the steam level.
4.
Steam level
1
2
3
To confirm the set steam level, press
5.
play.
Press
to start the operation.
6.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
When the food is ready, use
7.
ance off.
Added steam
Low
Medium
High
on the dis-
to switch the appli-
Empty the water tank and dry the cooking compart-
8.
ment.
→ "After using steam operation", Page 18
Changing added steam
You can change or deactivate the added steam func-
tion at any time.
Press
on the display.
1.
Press added steam
2.
Change or deactivate added steam using the setting
3.
ring.
To confirm the change, press
4.
a The change is applied.
11.4 Setting the steam jet function
Requirements
¡ Observe the information about the respective operat-
ing mode.
→ "Setting options with steam", Page 16
¡ The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. Operation is stopped.
→ "Filling the water tank", Page 16
Press the operating mode that you require in the
1.
menu.
Select the settings for the operating mode, e.g. type
2.
of heating and temperature.
Press
to start the operation.
3.
Press
on the display at the desired time.
4.
Do not use the steam jet until the appliance has
completely heated up.
Press
"Steam jet".
5.
a The
symbol lights up red and the appliance heats
up the water.
When the water is heated up, press
6.
again.
Note: If rapid heating
can only be triggered once rapid heating is com-
plete.
a The steam jet is triggered and the appliance adds
clouds of steam to the cooking compartment for ap-
prox. 3 to 5 minutes.
a When the steam jet has finished, the operation con-
tinues to run as normal. Depending on the opera-
tion, the steam jet can be triggered again if neces-
sary.
When the food is ready, use
7.
ance off.
Empty the water tank and dry the cooking compart-
8.
ment.
→ "After using steam operation", Page 18
Cancelling the steam jet
You can cancel the steam jet at any time.
Press
on the display.
1.
Press
" Steam jet".
2.
a The
symbol changes back to white.
a The operation continues without the steam jet.
Steam en
.
on the display.
"Steam jet"
is activated, the steam jet
to switch the appli-
17
Advertisement
Table of Contents
