Figure 19. Installing the inner rails to the enclosure
① Align the mounting holes in the inner rail with the corresponding rail mounting pins on the
side of the enclosure.
② Push the inner rail as shown until the mounting pins on the enclosure lock into place with the
inner rail.
Note: Make sure the stamp "Front" always faces toward the front when assembling the inner rail to
the enclosure.
Step 3.
Secure the inner rail to the enclosure with two screws.
Figure 20. Securing the inner rail
Step 4.
Repeat the previous two steps on the other inner rail.
Step 5.
(Optional) To reduce the weight of the enclosure, disconnect the power adapter cables from the
nodes and remove the nodes.
.
Chapter 6
Installing optional kits
21