b. Insert the open end of the combination wrench in the hardware box (see
page
6) into the hexagonal head of the foot, and turn it clockwise until the foot makes firm contact
with the floor.
Figure 11. Adjusting the rack cabinet foot
c. Once the leveling foot makes firm contact with the floor, tighten the nut that fixes it.
Figure 12. Tightening the nut
2. To secure the cabinet to the ground, you can install the bolt-down brackets that is included in the
hardware box (see
12
ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide
in
"Hardware box" on page
8
6).
in
"Hardware box" on
4