Time-Setting Options; Setting The Cooking Time; Setting The End Time - Bosch 500 Series Use And Care Manual

Time-setting Options

Your appliance has different time-setting options.
Time-setting Use
option
Cooking Once the set cooking time has
q
time elapsed, the appliance will automati-
cally stop heating.
r End Enter a cooking time and the
required end time. The appliance will
start up automatically so that it fin-
ishes cooking at the required time.
t Timer The timer functions like an egg timer.
It runs independently of the operation
and the other time-setting options.
After the set time has elapsed, the
appliance does not switch on or off
automatically.
You can call up the cooking time and the end time after
setting an operation using the touch-screen displays. The
timer has a separate field
time.
An audible signal will sound once the cooking time or
timer duration has elapsed. You can cancel the audible
signal early by touching a field or touch-screen display.
Note: You can change how long the audible signal
sounds for in the basic settings.

Setting the cooking time

You can set the cooking time for your food on the
appliance. This prevents the food from accidentally being
cooked for too long, and means that you do not have to
stop what you are doing to switch off the oven.
Setting
Depending on which direction you turn the rotary selector
first, the cooking time starts at a particular default value:
Left = 10 minutes, right = 30 minutes.
The cooking time can be set in one-minute increments
up to one hour, and then in five-minute increments.
The maximum time that can be set is 23 hours and 59
minutes.
Example in the picture: It is 10:00, cooking time of 45
minutes.
Set the operating mode and temperature or level.
1.
2. Before starting the operation, touch the "Cooking time"
text field.
The cooking time is highlighted in white in the display.
3. Turn the rotary selector to set the cooking time.
The end time is calculated automatically.
|
and can be adjusted at any
4. Press the Start/Stop button
The cooking time counts down.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating up. The cooking
time 00 m 00 s is shown in the display.
You can reset the cooking time using the "Cooking time"
text field or you can press the
continue the operation without a cooking time.
When your dish is ready, use the
switch off the appliance.
Changing and cancelling
To change the cooking time, touch the "Cooking time"
text field. The cooking time is highlighted, and can be
changed using the rotary selector. The change is applied
immediately.
If you want to cancel the cooking time, reset the cooking
time to zero. After the change has been adopted,
operating continues without a cooking time.

Setting the end time

You can delay the time at which cooking is due to finish.
You can, for example, put your food in the cooking
compartment in the morning and set the cooking time so
that it is ready at lunch time.
Notes
Ensure that food is not left in the cooking compartment
▯
for too long, as it may spoil. PLEASE OBSERVE ALL
SAFE FOOD HANDLING PRACTICES TO ENSURE
FOOD SAFETY.
Do not adjust the end time once the operation has
▯
started. The cooking result would no longer be correct.
l
to start.
l
Start/Stop button to
ÿ
On/Off button to
17