The vibration total value (tri-axial vector sum) deter- straight and curved cutting. mined according to EN62841-2-11: Power supply Model JR3060T The tool should be connected only to a power supply of Work mode : cutting boards the same voltage as indicated on the nameplate, and Vibration emission (a ) : 15.5 m/s...
When operating a power tool outdoors, use an WARNING: The vibration emission during extension cord suitable for outdoor use. Use of actual use of the power tool can differ from the a cord suitable for outdoor use reduces the risk of declared value(s) depending on the ways in which electric shock.
Page 4
Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and chang- ing accessories. Recipro saw safety warnings Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wir-...
Selecting the cutting action FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting the shoe ► 1 . Lever 2. Stopper This tool can be operated with an orbital or a straight line cut- ting action.
Page 6
Soft start feature To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch Safety and soft start because of suppressed starting shock. trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger and then push in the lock button.
NOTE: CAUTION: • If you do not insert the saw blade deep enough, • Always press the shoe firmly against the work- the saw blade may be ejected unexpectedly piece during operation. If the shoe is removed or during operation. This can be extremely held away from the workpiece during operation, dangerous. strong vibration and/or twisting will be produced, causing the blade to snap dangerously.
Page 8
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service ► 1 . Brush holder cap 2. Screwdriver Center. To maintain product SAFETY and RELIABILITY, repairs, •...