Load Configuration Operation
Load Configuration Using CLI
A.2
Load Configuration Using CLI
In this section:
A.2.1
Save Configuration File
A.2.2
Edit TEXT Configuration File
A.2.1
Save Configuration File
Save the configuration TEXT file in configuration mode.
Command:
> run show configuration | save FUJITSU-L100_config.txt
A.2.2
Edit TEXT Configuration File
Add
Header—
Load Replace
Edit the configuration file to add the header for load replace operation.
Commands:
% load replace FUJITSU-L100_config.txt
% commit
Load Merge
Edit the configuration file to add the header for load merge operation.
Commands:
%load merge FUJITSU-L100_config.txt
% commit
·
Release 19.1.1
Issue 1.1, May 2021
453
Fujitsu and Fujitsu Customer Use Only