Software Reset; Appendix Mapping Table - Bosch CLIMATE 5000 VRF BMS-MOD Installation & User Manual
Building management system gateway card (modbus)
Hide thumbs
Also See for CLIMATE 5000 VRF BMS-MOD:
- Installation manual (36 pages) ,
- Installation & user manual (24 pages) ,
- Installation and user manual (16 pages)
Advertisement
Modbus address
Initial address
needed to check
Address length
Click the "OK" button and it will display the content. If the content is the same as the value of the web page which has the same address, it means that
the software debugging is complete.
Take writting holding register for example:
Choose button
in Fig.3.7,as shown below:
Modbus
address
holding
register
address
After changed the value,click "send" button to finish the writting operation.
4.
Software Reset
Press"RESET" button on the gateway for 3 seconds and power on again, the software configuration will be back to the original setting.
5.
Appendix Mapping Table
CLIMATE 5000 VRF
change the value
Software Reset | 11
6720862468 (16/04)
Advertisement
