5.4 KX-TE Series PBX Programming for Inband Integration
5.4 KX-TE Series PBX Programming for Inband Inte-
gration
The instructions in this section are for programming a KX-TE series PBX via the Operating and Maintenance
Tool. To program a KX-TE series PBX using the Manager Extension, follow the instructions for KX-TE series
PBX programming by referring to 5.7 KX-TA Series PBX Programming for Inband Integration.
1.
Go to the 1.System - 2.Main screen.
2.
Under Voice Mail, select DTMF Integration, then select each extension jack that is connected to the VPS.
Click Apply to save the changed data.
3.
Go to the 2.Extension - 6.Extension Group screen.
4.
Put all extensions connected to the VPS into the same extension group.
Reserve this extension group for these extensions! Do not mix other extensions into this group.
140
Installation Manual
Document Version 2.1 2008/04