Table of Contents
Advertisement
g
EV Charging Station
2 Installation Instruction
2.1 Before Installing
Before any installation work is performed, study all drawings furnished by the supplier for the
particular installation.
These include arrangement drawings (front, end, and plan views), connections to the equipment that
may be required to meet any local codes (such as mats, screens, or railings) is not furnished.
2.2 Safety Requirements
Eye protection with appropriate glasses (especially when using the electrical drill).
In the installation be sure to not connect directly to power distribution network cables without
additional protection.
Ensure that at all times when working, no power is connected.
Use appropriate tools for each function.
2.3 Installation Overview and Specifications
This document describes how to install any EVSE charging station family.
It includes step-by-step instructions for installing the body assembly for the following stations:
Pedestal
Double Pedestal (Back to Back)
Wall- Mounted
Pole-Mounted
To ensure that the EVSE is installed per Americans with Disabilities Act (ADA) Standards for Accessible
Design guidelines, refer to code of federal regulations document 28 CFR Part 36, sections 4.2 (Space
Allowance and Reach Ranges) and 4.4 (Protruding Objects).
EVSE Torque Specification Table
SCREW SIZE
6-32 UNC
10-32 UNF
1/4-20 UNC
1/2-13 UNC
M6 x 1 LIGUIDTIGHT FITTING
FUSE BLOCK LUGS, 8 AWG
FUSE BLOCK LUGS, 6 AWG
GROUND TERM. SCREWS, 14-10 AWG
GROUND TERM. SCREWS, 8 AWG
3/4" LOCKNUT
GE EV Charging Station User Manual
User Manual & Installation Instructions
TORQUE
13 in-lb
30 in-lb
53 in-lb
48 in-lb
30 in-lb
40 in-lb
45 in-lb
34 in-lb
38 in-lb
HAND TIGHT + 1/4 TURN
- Table 1 -
TORQUE TOL.
+/- 2 in-lb
+/- 5 in-lb
+/- 7 in-lb
+/- 7 in-lb
+/- 5 in-lb
+/- 5 in-lb
+/- 5 in-lb
+/- 5 in-lb
+/- 5 in-lb
n/a
4 of 86
Advertisement
Table of Contents
