Optional Board Installation Method
4. SDI I/O board
(AJ-YA7100P)
Proceed with the connections in the sequence
described below.
1. Connect the cables (for SDI signals a3) from the
unit to the SDI I/O board.
2. Connect the coaxial cables (for video signals a1,
for audio signals a1) packed with the SDI I/O board
to the analog out board.
Analog out panel
(packed together with optional board)
VIDEO OUT
AUDIO OUT
AUDIO OUT
Analog out board
S-IN
ANALOG DIGITAL
REMOTE IN
VIDEO
OUT
IN
SDI/SDTI
IN
OUT
Orange
Black
Red
VIDEO OUT
S-IN THROUGH
SDI I/O board
3. Orient the SDI I/O board and analog out board so
that the sides on which components are mounted
are facing each other. Place spacers between
them, and attach them together with a total of eight
screws in the four places indicated.
4. Install the SDI I/O board and analog out board in
the server.
Perform the connections as illustrated below.
Rear panel connectors
(designated channel)
S-OUT
35