Table of Contents
Advertisement
"|"
"↲"
"ESC"
Disable output -----------------------------------------------------
-
Loop unit _ _ _ output _
Automatic re-enable:
Re-enable list
(1)
Loop unit 000001 output 0
Disable output
Loop unit 000000 output 0
B1 Zone or Zone/Address
B2 Output
B3 Output type
B4 Alarm devices
B5 Routing equipment
B6 Alert annunciation function
Escape
menu
No
Change type
of disablement
Change type of
disablements
116
Operation Manual
FT1020G3 Rev 2.10.4
Select in the Re-enable
list with "▼" (in this
example there is only
one item) and press "↲".
Re-enabled output will
disappear from the list,
indicated with a beep.
Disable (or Re-enable)
another output or press
"ESC".
Scroll to another menu
or press "ESC" or
"Escape menu".
Advertisement
Table of Contents
