Table Of Contents; Overview; Operation - Bosch MultiTalent 3 Instruction Manual

Congratulations on the purchase of your
new Bosch appliance. You can find further
information about our products on our
website.
Contents
Intended use ..................................................9
Important safety notices.................................9
Overview ......................................................11
Operation .....................................................11
Cleaning and servicing ................................14
Troubleshooting ...........................................15
Storage .........................................................15
Disposal .......................................................15
Recipes / Ingredients / Processing .............16

Overview

Fig. A
Base unit
1 Rotary switch
P = Stop
M = Instantaneous switching at maximum
speed, hold switch for required blending
duration.
Settings 1-2, Operating speed:
1 = low speed - slow,
2 = high speed - fast.
2 Drive
3 Cord store
4 Bowl
5 Tool holder
6 Tools*
a Universal blade with blade guard
b Kneading hook
c Beating disc
7 Cutting discs*
a Slicing reversible disc - thick/thin
b Shredding reversible disc -
coarse/fine
c Reversible slicing/shredding disc
8 Lid
a Filler opening
b Pusher
Accessories*
9 Blade insert with blender/cutting blade
and seal
10 Blade insert with grinding blade and
seal
11 Universal cutter jug
12 Blender jug
13 Lid for blender
a Filler opening
b Funnel-shaped stopper
* for some models
If the universal cutter is not included, it can
be ordered from customer service (order
no. 12005833).

Operation

Before operating the appliance and acces-
sories for the first time, clean thoroughly; see
"Cleaning and servicing".
Preparation
■ Place the base unit on a smooth, clean
surface.
■ Pull cable out of the base unit to the
required length.
Important information
- Use only the rotary switch to switch the
appliance on or off.
- Never switch the appliance off by rotating
the bowl, the blender or a tool.
- Do not switch the appliance on unless
tools or accessories have been completely
attached.
Bowl with accessories/tools
W Risk of injury from the rotating tools!
While the appliance is operating, never place
fingers in the mixing bowl. Always use the
pusher for adding ingredients. After switching
off, the drive continues running for a short
time. Change tools only when the drive is at
a standstill.
Warning!
When working with the bowl, the appliance
cannot be switched on until the bowl has
been attached and the lid has been attached
and screwed on tight.
Universal blade
for cutting, mincing, mixing.
W Risk of injury from sharp blades!
Do not touch blades of the universal blade
with bare hands. When not in use, always
store the universal blade in the blade guard.
Grip the universal blade by the edge of the
plastic handle only.
Contents en
11