2
Replacing the battery
Recycle the used battery, see section "Disposal and
scrapping" in these operating instructions (page 60).
1. Remove the two screws on the back of the TPA 300.
2. Remove the cover of the battery compartment.
3. Disconnect the battery and replace it with a new battery
(see page 56 "Spare and wearing parts").
Attention: Only use genuine Bosch spare parts.
4. Refit the battery compartment cover and the screws.
Robert Bosch GmbH
Miscellaneous | TPA 300 | 47 |
|
1 689 989 549_en
2022-09-01
en