Toro 137-5001 Installation Instructions

CE Bagger Compliance Kit
TimeCutter
Model No. 137-5001
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
This product contains a chemical or chemicals known to the State of California
1
Removing the Existing
Curtain and Knob
No Parts Required
Procedure
1. Park the machine on a level surface, shut off the
engine, engage the parking brake, and remove
the key.
2. Remove the existing curtain by loosening the
bolts holding the curtain to the frame and the
mower deck (Figure
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® HD Riding Mower
Description
No parts required
Curtain
Bolt (1/4 x 5/8 inch)
Proposition 65 Warning
to cause cancer, birth defects, or reproductive harm.
1).
Register at www.Toro.com.
Qty.
–
1
1
WARNING
CALIFORNIA
1. Bolts
Form No. 3415-409 Rev A
Installation Instructions
Use
Remove the existing curtain and knob.
Install the new curtain.
Figure 1
2. Curtain
Original Instructions (EN) All Rights Reserved *3415-409* A
Printed in the USA
g213267