Table of Contents
Advertisement
AMC2 4W | Installation manual
5.2
Demounting
NOTE!
i
To remove the AMC2 4W from a mounting rail, first, remove all
pluggable screw connectors.
Push down the AMC2 4W until it snaps out of the mounting rail.
Pull the lower end of the AMC2 4W from the mounting rail.
Fig. 5.2 Demounting the AMC2 4W from a mounting rail
Bosch Sicherheitssysteme GmbH
Installing | en 27
F.01U.024.965 | V 0.1 | 2006.03
Advertisement
Table of Contents
