Technical Data22 - Bosch AMC2 4W Installation Manual

22 en | Technical Data
4 Technical Data
Hardware
Power supply
Display
F.01U.024.965 | V 0.1 | 2006.03
– Integrated Microcontroller (32Bit,
30MHz)
– SRAM (2MB)
– Serial EEPROM
– RTC
– Pluggable Compact Flash from 64 MB
up to 1024 MB
– Battery for SRAM and real time clock
(RTC)
– Host address selectable via DIP sliding
switch or software
– Host interface
•
RS-485 2-wire or 4-wire
Transfer rate: 38,4 kBit/s
(No parity, 8 Bit, 1 Stopbit)
•
RS-232
•
Ethernet
– four Wiegand interfaces for card read-
ers
– Eight relay outputs
•
Maximum switching power: 60VA
•
Maximum switching voltage: 30V
AC/DC
•
Maximum switching current: 2A
– eight analog inputs with sabotage mon-
itoring
– Tamper contact for enclosures
Electronics: 10V – 30V DC
64,8 mm x 13,9 mm
1 line, 16 characters
AMC2 4W | Installation manual
Bosch Sicherheitssysteme GmbH