Nokia ONT Product Manual page 144

Configure a G-2426G-B indoor ONT
Network configuration
Configuring Upstream (US) Classifier
Table 8-23 US Classifier parameters (continued)
Field
Source IP
Destination IP
Source Port
Destination Port
Protocol
Priority
6
Click Save.
Click Reset to reset the classifier configured.
Click Refresh to view the up-to-date information.
Click Delete for the applicable classifier in the classifier table, to delete a classifier.
Note: A classifier can only be deleted if it is not associated with any classifier rules.
7
Select the Classifier Rules tab.
All classifier rules are displayed in the classifier rules table in the page.
144
Description
Click to enter a source IP address.
Click to enter a destination IP address.
Click to enter a source port.
Click to enter a destination port.
Click to enter a protocol.
Select a priority level from 1 to 8. The lower the number, the higher the priority. No more
than 1 classifier can be created with the same priority.
3FE-49441-ABAA-TCZZA
Nokia ONT
June 2021
Issue 1