Configure a G-2426G-B indoor ONT
Network configuration
Configuring Upstream (US) Classifier
Figure 8-26 US Classifier Policy page
2
Select a tunnel interface.
Table 8-22 US Classifier Policy parameters
Field
Tunnel Type
Tunnel Interface
VLAN ID
VLAN Tag
VLAN Priority
IP TOS/DSCP
Drop
3
Click Save.
Click Reset to reset the policy configured.
Click Refresh to view the up-to-date information.
142
Description
The tunnel type is set to GRE and cannot be modified.
Select a tunnel interface from the list: No Tunnel, GRE Tunnel, or LAN traffic.
Enter a VLAN ID (0-4094).
This field is not configurable. The VLAN tag is set to 8100 (hexadecimal).
Enter a VLAN priority level (0 to 7). A lower number indicates a higher priority.
This field is not configurable. All tunnel packets are generated with a default DSCP value
(usually 0).
Select this checkbox to drop the packets.
3FE-49441-ABAA-TCZZA
Nokia ONT
June 2021
Issue 1