Pioneer AVH-P6500DVD UC Service Manual page 132

1
A
EDC1
mode
RIGHT
Layer 0
selected
0000 0000
1003 0000
RIGHT
BACK/TEXT
ID
designation
B
ATT
EDC1 start
F-close and F-search cannot be executed, unless LD-ON is set.
[If F-close isn't executed within 9 seconds after LD-ON,
it switches to LD-OFF automatically. And even if F-search is executed
within 9 seconds after LD-ON, it also switches to LD-OFF.]
The track number designation is selected from the track numbers already prepared for selection.
Switching to cyclic operation is made at step REAR, and the decision is finalized (entered) in step BACK/TEXT.
C For CD: Tracks 1, 4, 10, 11 and 32.
For DVD: Tracks 1, 4, 10, 11, 32, 64 and 100.
Method for designating an ID address:
• A number of digits are determined through commands RIGHTand LEFT. Numerical UP/DOWN operations are performed
through commands REAR and BACK/TEXT. The decision is finalized (entered) with command ATT.
OSD display
Error Code List
Error status from
DVD micurocomputer Contents
D
0X50
0X40
0X30
0X20
0XE2
0X90
0XFF
Error code of read error(Part of XX)
Error Code Contents
E
0X99 Data cannot read
0X80 The address cannot be found Please condirm the disc
0X90 Focus error
0X91 Spindle lock NG
0X92 Carrige home NG
0X93 FOK error
0X94 ID/Subcode cannot be read
0X95 High spindle rotation
0X96 Row spindle rotation
0X98 TOC cannot be found
0X9A AV chip error
0X9B RecaveryNG(BE)
F
132
1
2
0000 0000
LEFT RIGHT
Layer 1
selected selected
0100 0000
1103 0000
RIGHT
BACK/TEXT
Layer0:10** ****
Layer1:11** ****
designation
** ****: ID specification value
ATT
Layer0:20** ****
EDC2 start
Layer1:21** ****
** ****: Present ID value
Display
Mecha. error No dislay
No disc No dislay
The temperature is abnormal Thermal Protection in Motion
Read error Error-02-XX
Non-playable disc NON-PLAYABLE DISC
Drrerent region disc DFFERENT REGION DISC
Undefined error Error-FF
Display
Please condirm the disc
Please condirm the disc
DVD is stopping because mechanism detected abnormality
DVD is stopping because mechanism detected abnormality
Please condirm the disc
Please condirm the disc
Please condirm the disc
DVD is stopping because mechanism detected abnormality
Please condirm the disc
DVD is stopping because mechanism detected abnormality
DVD is stopping because mechanism detected abnormality
2
3
EDC2
mode
0000 0000
LEFT
Layer 0 Layer 1
selected
0000 0000
0100 0000
1003 0000
1103 0000
Layer0:10** ****
ID
Layer1:11** ****
** ****: ID specification value
Layer0:20** ****
Layer1:21** ****
** ****: Present ID value
AVH-P6500DVD/UC
3
4
4