Panasonic LP-GS Series Operation Manual page 81

LP-400/LP-V setting categories
Marking character
Character condition
Bar code condition
Logo condition
Processing condition
Point radiation condition
General condition
Function setting
Common setting
Laser setting
Trigger setting
In the converted files, the parameters for "Marking settings" > "File settings" > "Compatibility
with former models" are the same as the settings of the source data.
Object number and object group number
The object numbers of the marking data are assigned to the numbers shown in the following
table. These numbers can be used with LP-400/LP-V compatible command mode. The
marking data converted from LP-400/LP-V files and data set by LP-400/LP-V compatible
command mode are assigned to the object group number 1000. If another object number
or object group number is set, the marking data cannot be controlled by the LP-400/LP-V
communication commands.
Object type
Character object (reference list type)
Bar code object, 2D code object
Graphic object
Shape object
Point radiation object
Object group
ME-NAVIS2-OP-1
Setting categories in Laser Marker NAVI smart
Reference character strings
Character object settings
Bar code object settings
2D code object settings
Graphic object settings
Shape object settings
Point radiation object settings
File settings
Object group settings
Function settings
Function settings for all files
Reference character strings for all files
Laser settings
Object group settings
On-the-fly marking
File settings
Object number
1001–1060
1100–1107
1200–1215
1300–1315
1400–1415
1000
6 Work with files
81