Page 1
Installation Manual Additional Digital Cordless Handset KX-TGA939 Model No. Thank you for purchasing a Panasonic digital cordless phone. This unit is an additional handset compatible with the following Panasonic Digital Cordless Phones: KX-TG9391/KX-TG9392 You must register this handset with your base unit before it can be used.
L To order additional/replacement accessories, call 1-800-332-5368. L TTY users (hearing or speech impaired users) can call 1-866-605- 1277. Connection (120 V AC, 60 Hz) Hooks Note: L Use only the supplied Panasonic AC adaptor PQLV209 or PQLV219. For assistance, please visit http://www.panasonic.com/help...
Page 3
L When replacing the batteries: – USE ONLY rechargeable Ni-MH batteries AAA (R03) size. – Do NOT use Alkaline/Manganese/Ni-Cd batteries. – We recommend using the Panasonic rechargeable batteries noted in the base unit’s operating instructions for replacement battery information. Press the notch on the handset cover firmly, and slide it in the direction of the arrow.
L If an error tone sounds, or if w is still flashing, register the handset according to the base unit’s operating instructions. Display language {MENU} i {#}{1}{1}{0} {V}/{^}: Select the desired setting. Press the middle soft key to save. i {OFF} For assistance, please visit http://www.panasonic.com/help...
Screws (120 V AC, 60 Hz) Belt clip You can hang the handset on your belt or pocket using the supplied belt clip. N To attach the belt clip N To remove the belt clip For assistance, please visit http://www.panasonic.com/help...
These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211- PANA (1-800-211-7262). Installation L To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.
They may explode. Check with local codes for possible special disposal instructions. Routine care L Wipe the outer surface of the product with a soft moist cloth. L Do not use benzine, thinner, or any abrasive powder. For assistance, please visit http://www.panasonic.com/help...
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. For assistance, please visit http://www.panasonic.com/help...
Page 9
L The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. Notice: L FCC ID can be found inside the battery compartment or on the bottom of the unit. For assistance, please visit http://www.panasonic.com/help...
Page 10
à la législation locale. LEste producto está diseñado para usarse en los Estados Unidos de América. La venta o el empleo de este producto en ciertos países puede constituir violación de la legislación local. For assistance, please visit http://www.panasonic.com/help...
Manual de instalación Auricular Inalámbrico Digital Adicional KX-TGA939 Modelo N° Gracias por adquirir un teléfono inalámbrico digital Panasonic. Esta unidad es un auricular adicional compatible con los siguientes teléfonos inalámbricos digitales Panasonic: KX-TG9391/KX-TG9392 Debe registrar este auricular con su unidad base antes de poder usarlo.
Accesorios incluidos Accesorio/Número de pedido Cantidad Cargador/PNLC1001YT Adaptador de corriente para el cargador /PQLV209T o PQLV219Z Baterías recargables Tapa del auricular /PNYNTGA430BR Gancho para el cinturón/PNKE1004Z1 *1 Los dos adaptadores para corriente funcionan bien con el cargador. *2 Lea las instrucciones de operación de la unidad base para obtener información acerca de las baterías de reemplazo.
Page 14
Nota: L Use sólo el adaptador de corriente Panasonic PQLV209 o PQLV219 incluido. L El adaptador de corriente debe permanecer conectado todo el tiempo. (Es normal que el adaptador se caliente durante su uso.) Instalación y carga de la batería Importante: L Utilice las baterías recargables que se suministran (N°...
Montaje en la pared Inserte los tornillos (no incluidos) en la pared. Monte el cargador (A) y deslícelo hacia abajo (B) y a la derecha (C) hasta que quede bien asegurado. 25.4 mm (1 pulgada) Tornillos (120 V CA, 60 Hz) Gancho para el cinturón Usted puede colgar el auricular en el cinturón o bolsillo usando el gancho para el cinturón incluido.