Technical Data; Ambient Conditions; Pneumatics - Bosch Rexroth HQ 5/H Assembly Instructions Manual

16 Technical data

• For dimensions, see sales catalog TS 5, 3 842 540 379 .
• Permissible section load:
• Max. load:
• Noise emission:

16.1 Ambient conditions

• The transfer systems have been designed for stationary use in weather-protected
areas.
• Operating +5 °C to +40 °C
temperature –5 °C to +60 °C at 20% reduced load
• Storage temperature -25 °C to +70 °C
• Relative humidity 5% to 85%, non-condensing
• Air pressure > 84 kPa, corresponds to an altitude < 1400 m above sea level
• Max. load capacity of fl oor: 1000 kg/m
• At altitudes > 1400 m, the load values of the electric drives are reduced by 15%.
• The area should be kept free of mold, fungus, rodents and other vermin.
• Do not install or operate in the immediate vicinity of industrial equipment
producing chemical emissions.
• Do not install or operate near sources of sand or dust.
• Do not install or operate in areas that are regularly subjected to high-energy forces
caused, for example, by presses or heavy machinery.
• Resistant to many media that are commonly found in manufacturing, such as water,
mineral oil, grease, and detergents. Contact your Rexroth representative if you have
any doubts about resistance to specifi c chemicals, such as test oil, doped oils,
corrosive detergents, solvents or brake fl uid.
• Avoid prolonged contact with highly reactive acidic or alkaline materials.

16.2 Pneumatics

• Oiled or non-oiled, fi ltered, dry compressed air.
• Operating pressure:
• Solids
– Particle size
– Particle quantity
• Humidity – water content
1
– Pressure dew point )
1
) The pressure dew point should be at least 15 °C below ambient temperature.
• Oil content
– Oil quantity
ST 5/H
ST 5/XH
HQ 5/H
HQ 5/XH
2
4 to 6 bar
≤ 5 µm (Class 6 as per ISO 8573-1:2010)
3
≤ 5 mg/m (Class 6 as per ISO 8573-1:2010)
≤ +3 °C (Class 4 as per ISO 8573-1:2010)
3
≤ 1 mg/m (Class 3 as per ISO 8573-1:2010)
3 842 558 544/2017-07, MIT: HQ 5/H, HQ 5/XH, Bosch Rexroth AG
Technical data 53/60
200 kg/m
380 kg/m
300 kg
300 kg
< 70 dB (A)