Table of Contents
Advertisement
Installation
The module can be used to control shutters
/ sun blinds / Venetian blinds or to control
lighting.
You must connect the module according to
your desired purpose, then link it with the
Smart Home controller and configure the
purpose (shading or lighting) in the app.
Incorrect configuration can lead to a defect
with the connected consumers.
The configuration, shading or lighting, is
stored in the device and can only be cancelled
by resetting the device to factory settings.
If the device has not been configured for
shading or light, the inputs S1/S2 do not issue
any switching commands.
Ensure that the terminal area does not
come into contact with the metal parts of
the installed device.
The module may only be used outdoors
with the corresponding protective housings
(IP66).
Advertisement
Table of Contents
