Table of Contents
Advertisement
Product overview
The status LED (2) shows the status of the light/
shutter module using flashing codes.
Status LED
Flashes orange
Flashes green
Flashes red
Flashes red 6x
(long)
2
1
3
Device status
Tuning mode (is
active) or device is
communicating with the
controller
Tuning mode
(successful) or process
confirmed
Tuning mode (not
successful) or
process failed
The device is defective
Item Description
1
System button
2
Status LED
3
Terminals
Recommended action
Please wait
If this is the first tuning attempt, please try
again. Otherwise reset the device to the factory
settings and contact the service department if
necessary.
Please contact support.
Advertisement
Table of Contents
