Table of Contents
Advertisement
2
Performing the Initial Configuration
For more information, see the section in the appropriate installation guide
about entering passwords.
Note
If the username login screen does not appear, you might not have a
physical network connection between the host and your appliance, or you
might have a network routing problem. Confirm the information you
entered during the initial configuration and check that all cables are firmly
connected. For more information, see the troubleshooting chapter in the
appropriate installation guide.
Accessing Nokia Network Voyager Reference
Information
As you use Nokia Network Voyager, the Nokia Network Voyager Reference
Guide and Voyager inline help are available for you to use.
You can access both information sources from the Network Voyager interface,
as
48
You are prompted to enter the admin username and the password you
entered when you performed the initial configuration.
Figure 10
shows.
Nokia IP1200 Series Security Platform Installation Guide
Advertisement
Table of Contents
