Table of Contents
Advertisement
1
Overview
Caution
The Nokia IP1200 Series power supply might be hot to the touch
when the power supply unit is plugged in to an AC power source and
the power supply is not turned on. This is because the internal
cooling fan for each power supply runs only when the unit is turned
on.
Figure 8 Power Supply, Cooling Fan, and Power Switch Locations
AC power receptacle
Power supply A
Power supply B
For information about how to install or remove and replace a failed power
supply, see
Power Supply Status LEDs
The power supply status LEDs provide the status of the power supplies as
described in
34
Cooling fan
"Installing or Replacing a Power Supply"
Table
6.
Nokia IP1200 Series Security Platform Installation Guide
Power supply switch
on page 141.
00308a
Advertisement
Table of Contents
