Advertisement
Inspection Results and Output
13.6
Data Monitor
5.
When you have finished entering the title, use the cursor
lever to select Input Complete and confirm to display the title
that you input.
<A :Lock>
It is possible to lock the maximum and minimum values so
that they cannot be changed from the Data Monitor.
Press A with the register highlighted to lock the setting
values (an "L" will be displayed to the left of the item). To
unlock, press A again.
L
CA01
<B :Delete>
Press ENTER with the register highlighted to delete a display
item, then press B.
Editing display item titles
Use the following procedure to edit the titles of display items.
Procedure:
1.
Align the cursor with the item that you want to change and
press ENTER to display the register selection window.
2.
Use the cursor lever to select and confirm Title.
3.
The title input window will appear. Edit the title in the same
way as you would input a new title.
13 − 36
WIDTH
OCR Type A230
Advertisement
