Table of Contents
Advertisement
Aria-34e
Installation
Digital Key Telephone System
For example, when the 2BRI(or PRI) board is installed in slot #3 and the STIB board
is installed in any one of universal slots, connect from CN1(out) of 2BRI (or PRI) to
CN2(in) of STIB.
It should be noted that the system will not operate properly when either the PLLU2 is
not installed or clock control cable is not installed even though one or more ISDN
interface board(s) is (are) installed in the system. Also, the MEMU should be installed
in the system when using the PRI board.
(2BRI or PRI Card is installed on slot 2, and one or more STIB is (are) installed in
universal slot(s).)
4-40
Rev 1.3
Aria Communications Pty Ltd.
A.C.N. 090 723 925
Advertisement
Table of Contents
