Miele ESW 47XX Installation Instructions Manual
Miele food warmer user manual
Hide thumbs
Also See for ESW 47XX:
- Operating and installation instructions (44 pages) ,
- Installation instructions manual (23 pages)
Related Manuals for Miele ESW 47XX
Summary of Contents for Miele ESW 47XX
- Page 1 Installation Instructions ESW 47xx ESW 48xx en_CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
-
Page 2: Electrical Connection
CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held... -
Page 3: Installation Tips
Installation Installation tips – The warming drawer should be placed at a convenient height for easy access. – The drawer should be installed clear of drafts caused by open doors and windows. – Proper clearance must be allowed for the warming drawer to open with out interference. - Page 4 Dimensions for Solo Installation ESW 47x0 a Material must be moisture resistant Miele appliances can be installed ush or proud. Discuss your installation requirements with you architect, designer and installer. Installation...
- Page 5 Installation ESW 48x0 a Material must be moisture resistant 2 4 " ( 6 1 " 1 / 2 " - 0 - 7 ( 6 6 " / 1 6 6 " 6 " 1 "...
- Page 6 Installation Dimensions for a combination installation with an oven ESW 47x0 a Material must be moisture resistant...
- Page 7 Installation ESW 48x0 a Material must be moisture resistant...
-
Page 8: Installing The Warming Drawer
Installing the warming drawer ^ Remove the drawer from the casing before installing the appliance into the cabinetry. Removing the drawer ^ Pull the drawer completely out and loosen the nuts. ^ Carefully lift the drawer and pull it slowly out. Set the drawer down on a flat, stable surface. -
Page 9: Integrated Installations
Installation Integrated installations Models 4700 FB and 4800 FB Custom made front panels can be installed with models 4700 FB and 4800 FB. Panel dimensions 4700 FB Width 27 " (695 mm) Height 11" (279 mm) 4800 FB Width 29 "... - Page 10 f Press the custom panel tightly onto the removed panel. g Screw the removed panel to the custom panel with the eight screws. h Hook the panels into the bottom on and secure at the top with two screws making sure the seal is seated correctly.
- Page 11 Alteration rights reserved / 3206 M.-Nr. 06 543 320 / 06 en - US...