Lvd Compliance - GE AquaTrans AT868 Abridged Manual

Panametrics liquid flow ultrasonic transmitter

Hide thumbs Also See for AquaTrans AT868:

Table of Contents

LVD Compliance

Installation

For compliance with the European Union's Low Voltage Directive

(73/23/EEC). the analyzer requires an external power disconnect

device such as a switch or circuit breaker. The disconnect device must

be marked as such, clearly visible, directly accessible, and located

within 1.8 m (6 ft) of the unit.

Note: If the instructions in this section are followed, the unit will

comply with the Low Voltage Directive (73/23/EEC).

Figure 1-1: Properly Wired AT868

September 2004

1-5

Table of Contents