Note • Screws required for wall installations are not furnished and This unit is designed for exclusive use with Pioneer Speaker must be provided by the user. System S-VSL3. • A Phillips screwdriver is required for assembly.
Temporary mounting Assembly and Installation When the mounting fixture is combined with the speaker system S-VSL3, the total weight is about Remove base 10 kg. The installation technician should decide NOTE on the optimum mounting method based on an Using the provided Allen wrench, remove the three base assessment of the wall’s materials and screws and then the base from the speaker.
Page 8
Fasten the mounting fixture to the wall Attach safety strap to wall When fastening the fixture to the wall, use a minimum of Attach the safety strap to the wall. Using anchor bolts or six screw locations, including the four holes at the top and other means as necessary, provide ample support strength.
Page 9
Secure the bottom of the fixture CP-VSL3 Mounting Fixture Hole Dimensions (unit=mm) Using the two provided screws (PMM60P120S), secure Mounting holes for fixture to wall the bottom of the fixture to the speaker through the two Hole for temporary holes shown in the illustration.
Page 10
Esta unidad está diseñada exclusivamente para su empleo con el • Los tornillos necesarios para las instalaciones en la pared sistema de altavoces S-VSL3 Pioneer. no se suministran y deberá adquirirlos el usuario. • Se requiere un destornillador de cabeza en cruz para No la emplee con ningún otro sistema de...
Montaje provisional Montaje e instalación Cuando se combina el accesorio de montaje con el sistema de altavoces S-VSL3, el peso total es Extraiga la base aproximadamente de 10 kg. El técnico de NOTA instalaciones deberá decidir el método óptimo de Empleando la llave hexagonal suministrada, extraiga los montaje basándose en el material y la estructura tres tornillos de la base y luego la base del altavoz.
Page 12
Fije el accesorio de montaje a la pared Conecte los cables de altavoz y páselos por el accesorio de montaje Cuando fije el accesorio a la pared, emplee un mínimo de seis posiciones de Conecte los cables de altavoz y páselos por el orificio tornillo, incluyendo los cuatro orificios de cuadrado de la parte inferior del accesorio de montaje.
Page 13
Parte frontal Parte posterior Vista frontal Vista lateral Dimensiones de montaje de altavoces CP-VSL3 (unidad=mm) Superficie de la pared Observación sobre las bases de los altavoces Si en el futuro usted decide instalar los altavoces otra vez en el suelo, asegúrese de conservar las bases de los...