Toro Groundsmaste 3200 Series Installation Instructions Manual page 3

3
Installing the Switch Mount
Parts needed for this procedure:
2 Mount bracket
4 Carriage bolt (1/4 x 2 inches)
2 Locknut (1/4 inch)
2 Hex-head screw (1/4 x 3/4 inch)
2 Flange nut (1/4 inch)
1 Flasher
1 Relay
1 Wire harness
2 Cable tie
1 Fuse cover
2 Thumb screw
2 Push nut
1 Decal
2 Screw (#10 x 3/8 inch)
1 Multi-function switch
3 Hole plug
1 Rocker switch
1 Control cover
6 Hex-head screw (1/4 x 3/4 inch)
2 Switch clip
2 Push rivet
Procedure
1. Loosely install the switch mount around the
steering column using 4 carriage bolts (1/4 x 2
inches), 2 mounting brackets, fuse-mount plate,
and 4 locknuts (1/4 inch) as shown in
1. Locknuts (1/4 inch)
2. Fuse-mount plate
3. Mounting brackets
3
Figure
Figure 4
4. Steering column
5. Switch mount
6. Carriage bolt (1/4 x 2
inches)
4.
g319856