Unpacking the Auto Take-Up Reel
Make sure you have all the items shown below.
Drive unit
Left paper stop
(for movable unit)
Right paper stop
(for drive unit)
64-inch wide 3-inch core
Installing the Auto Take-up Reel
1. Attach the drive unit to the right side of the support bar as shown below,
and use the large screws to secure the drive unit.
1-25
Setting Up the Printer
Movable unit
Drafting
tape
2 large screws,
4 small screws
|
25
Reflector
Movable unit stopper
2 cable clamps