SPECIFICATIONS Model: M9100 6 mm or 6.35 mm (1/4″) Max. collet capacity Max. wheel point size Max. wheel diameter 20 mm Max. mandrel (shank) length 46 mm Rated speed (n)/No load speed (n 33,000 min Overall length 350 mm Net weight 1.4 kg...
Page 3
Personal Safety Use the power tool, accessories and tool bits etc. in accordance with these instructions, tak- Stay alert, watch what you are doing and use ing into account the working conditions and common sense when operating a power tool. the work to be performed.
Page 4
Wear personal protective equipment. Kickback and Related Warnings Kickback is a sudden reaction to a pinched or snagged Depending on application, use face shield, rotating accessory. Pinching or snagging causes rapid safety goggles or safety glasses. As appro- stalling of the rotating accessory which in turn causes priate, wear dust mask, hearing protectors, gloves and workshop apron capable of stop- the uncontrolled power tool to be forced in the direction...
Observe the instructions of the manufacturer Installing or removing wheel point for correct mounting and use of wheels. Handle and store wheels with care. CAUTION: Use the correct size collet cone for Check that the workpiece is properly supported. the wheel point which you intend to use. 10.
► 1. Brush holder cap To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Turn the tool on without the wheel point making any contact with the workpiece and wait until the wheel point attains full speed.