Table of Contents
Advertisement
Bosch Motorsport
6.
Disconnect the C 80 network cable.
7.
Click on the 'Read Data from Logging Device' icon.
8.
Choose your logger and click 'OK' when done.
Click
'read data from
logging device'
The 'Data Logger Import' dialog opens. Refer to the WinDarab V7 manual for instruc-
tions on how to use the 'Data Logger Import' dialog and for more detailed descrip-
tions and instructions.
9.
Choose the device and the IP address for the device.
10. Click 'Apply changes' when done.
11. Connect the C 80 network cable.
12. Click on the 'Current Import' tab.
13. Click on 'Import' in the lower right corner.
If the 'Import all on connect' box is checked, the data transmission from the C 80
starts automatically. Measurement files are stored automatically in the folder defined
under 'Settings'.
Manual_C_80
First Steps | 8
Choose your Device / IP
from dropdown list
23 / 144
Advertisement
Table of Contents
