Guide to the appliance
Display functions
The display is used to select or set the
following:
- the programme
- the timer
- the
Settings
The display can show the following:
- the programme stage
- the estimated time left for the
programme to run
- the current temperature of the
programme stage
- water consumption
- any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not touch any sensors during this
time.
Touch the sensor to switch the
dishwasher back on.
8
The OK sensor is used to confirm a
message or setting and also to move to
the next menu or another level.
Under Settings a scroll bar will
appear in the right of the display. This
offers further options. These options
can be viewed using the sensors.
You can alter the dishwasher's controls
to suit changing requirements in the
Settings menu (see "Settings").
The option that is selected will have a
tick next to it.
To exit a submenu use the
Back sensor.
If you do not press any sensors for
several seconds, the display will revert
to the previous menu. You will then
have to enter your settings again.