Switching on the dishwasher
Make sure the spray arms can rotate
freely.
Close the door.
Turn on the tap if it is turned off.
Touch the sensor.
If the dishwasher has been switched
off for longer than 1 minute, you will
need to touch the sensor for
slightly longer (wipe protection).
ECO will appear briefly in the display
and the appropriate sensor will be
illuminated.
Next, the estimated energy and water
consumption may be shown for the
selected programme for several
seconds.
Then the display will show the
estimated duration for the selected
programme.
The Start sensor flashes.
Selecting a programme
Choose your programme according to
the type of crockery and the degree of
soiling.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
Touch the sensor for the programme
you want.
The sensor for the selected programme
will light up.
You can now select programme options
(see "Programme options").
If any programme options are selected,
the appropriate sensor will light up.
Operation
55