Time; Drying Levels; Extended Cool Down; Airways Indicator - Miele TMV 840 WP Operating Instructions Manual

Settings menu

Time

First select either a 24-hour or 12-hour
clock. You can then set the current time
of day.
Clock format
–
24 h clock
–
12 h clock
 Confirm your choice for the clock
format.
Setting the time of day
 Use the - or + sensor to enter the
hour and the minutes and confirm
with the sensor.
OK

Drying levels

You can alter the drying levels for the
Cottons, Minimum iron and Automatic
plus programmes.
The setting selected is shown in a bar
chart.
Factory default: a medium setting
–
      
Damper
The programme duration is shorter.
–
      
Drier
The programme duration is longer.
 Confirm with the
Exception:
The
Cottons
remain unchanged.
92
sensor.
OK
programme will

Extended cool down

The automatic cooling down phase
which takes place before the end of a
programme can be extended for all
programmes with selectable drying
levels in 2-minute increments up to 18
minutes. This makes the garments
easier to handle.
Options
– 00 minutes (factory default)
– 02, 04, 06 ... 18 minutes
 Use the + sensor to set the minutes
and confirm with the

Airways indicator

Fluff should be removed after drying.
The Clean out airways message will
remind you to clean the filters when a
certain amount of fluff has collected in
them. You can decide at what level of
fluff this reminder should be given.
You will have an idea of how often this
should be done after a few drying
programmes.
Options
–
Off
Clean out airways
there is a very severe blockage in the
ducting, the programme will be
cancelled and the message
will appear in the display
airways
regardless of this option.
–
Heavy
Clean out airways
there is a heavy build-up of fluff.
– (factory default)
Normal
sensor.
OK
does not appear. If
Clean out
only appears when