Advertisement
If this doesn't help pls. flash a standard click app to the device, e.g
works try to flash the device agent again.
22
Log in XDK Workbench shows
When you see an exception as below, then you should increase the heap size
in
xdk110/Common/config/AmazonFreeRTOS/FreeRTOS/FreeRTOSConfig.h
INFO | XDK DEVICE 2: MQTTOperation_Init: Reading boot status: [0]
INFO | XDK DEVICE 2: SntpSentCallback : Success
INFO | XDK DEVICE 2: SntpTimeCallback : received
INFO | XDK DEVICE 2: ----- HEAP ISSUE ----
INFO | XDK DEVICE 2: MQTT_ConnectToBroker_Z: Failed since Connect event was not
received
INFO | XDK DEVICE 2: MQTTOperation: MQTT connection to the broker failed
try again ...
Increase heap size in
changing the following value:
#define configTOTAL_HEAP_SIZE
is (( size_t )(70 * 1024 ))
23
Config file cannot be pared
Please verify if you used Linux line endings
back to content
24 Sample dashboards
25
Dashboard with SCADA widget
A sample dashboard can be build using the resources/Container_V01.svg.
Please see:
https://www.cumulocity.com/guides/users-guide/optional-services/
documentation on how to use the svg in a SCADA widget.
9
©2019 Software AG. All rights reserved.
xdk110/Common/config/AmazonFreeRTOS/FreeRTOS/FreeRTOSConfig.h
----- HEAP ISSUE ----
(( size_t )(72 * 1024 )) # old value
\n
. If this
LedsandButtons
.
[0] time,
by
for a
Advertisement
