Advertisement
toggle yellow light on/off, initiated by command from shell (option 1.):
•
o
toggle
enable/disable sensor, initiated by command from shell (option 1.):
•
o
sensor NOISE TRUE
To tkae effect an restart is required. Enabling/disabling the sensor is written
to the config file on the WIFI chip
restart XDK from C8Y, issued by option in drop-down menue (option 3.):
•
select XD: device in C8Y cockpit and execute "Restart device" from
o
dropdown-menue "More"
toggle yellow light on/off, initiated from message (any text) widget (option 2.):
•
add "Message Widget" to dashboard, use your connected XDK device as
o
destination and send any text to this XDK
stop/start publishing measurements:
•
o
stop
o
start
12
View events sent from device
You can view the last events transmitted form the XDK by accessing the app
and follow: Device Management>Devices>All Devices. Then choose your XDK
management
and select the
Events
You can see events like::
1. XDK started!
2. Publish stopped!
3. Publish stated!
13
Buttons
The buttons have following on the XDK have the following functions:
Button one dot: stop/start sending measurements to Cumulocity
•
Button two dots:
•
if pressed for longer than 3 seconds resets boot status stored on device
o
flash to "NOT_IN_BOOT_PROCESS"
if pressed shortly prints the configuration currently stored in
o
the
config.txt
if pressed during the startup process of the XDK the configuration stored
o
on the WIFI chip is deleted
14
Detailed configuration
The C8Y Agent for XDK sends the following sensor measurements to C8Y:
5
©2019 Software AG. All rights reserved.
or
sensor NOISE TRUE
template
file on the filesystem of the WIFI chip
: to enable/disable the noise sensor.
Device
Advertisement
