6.
After adjusting the item number to "13" in Menu 2-F1 settings, press the START/STOP
ton to switch to the function setting screen.
Setting item selection screen
RELATED LINKS
"Indoor unit address setting"
"Refrigerant circuit address setting"
"Indoor unit function setting"
Indoor unit address setting
NOTE: Perform this setting on the master remote controller.
1.
While displaying the function setting screen, press the TEMP. "
lect the 2-wire remote controller address.
Function setting screen
2.
Press the START/STOP
Example: Selecting the 2-wire remote
controller address
3.
Press the TEMP. "
Function number
1-4. Address setting by remote controller
Item number
on page 07-33
on page 07-35
on page 07-88
button to switch to the function number setting.
/
" or TEMP. "
" button to adjust the function number.
- (07-33) -
Function setting screen
" or TEMP. "
" button to se-
Example: Selecting the 2-wire remote
controller address (002-01)
Function number
Function number
but-
/
1. System settings