Electrolux GT1 Push Operator's Manual page 6

S
- top the freezing system (by switching off
the snowflake or the waves button) and let the
machine run with the only auger activated (all
LED switched off) for ten minutes.
P
- rovide yourself with a sanitizer suitable for
plastic, rubber and stainless steel objects
S
( odium hypochlorite 2%).
IMPORTANT
C
arefully follow the mix producer
prescriptions in terms of time and modes
of conservation.
A
- fter unlocking the main cover with its key
(fig.1), remove the main cover and the
secondary one under it (fig.2).
P
- our lukewarm water into the bowl (fig.3)
and, after re-positioning the main cover, make
the scraper auger rotating for some minutes (all
LED switched off).
NOTE
GT
is equipped with a very efficient safety
mechanism, activated when the cover is lifted,
designed to protect the operator. If the cover
is not correctly positioned
E
- mpty the bowl and repeat the same
operations until the coming out water is clear
(fig.4).
Data di emissione: Febbraio, 2019
GT
will not
work.
Revisione: 6
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Pag. : 6/28