Fujitsu BS2000 SE Series Operating Manual page 60

Server Unit /390
Invoking IORSF Control Frame
> Enter in the SELECTION=> field. Press the ENTER key.
2
i If the frame code
entered in line 24, the following frame is displayed immediately.
The AUXILIARY FRAME: IORSF CONTROL screen is displayed:
Figure 27: AUXILIARY FRAME: IORSF CONTROL screen
The first four IORSFs are displayed in the upper portion of the screen. You can scroll to the next four IORSFs
with the Page down key, and back with the Page up key.
In this example the IORSF with the number 0 is active.
Display: CURRENT NO. = 0
Now you want to activate the IORSF with the number 2:
> Enter in the FUNCTION=> field. Press the ENTER key.
1
> For our example enter
is entered in the MODE SELECTION FRAME or the
AU2
in the
2 NEXT POWER ON RESET NO.
FR AU2
field and press the ENTER key.
command is
60