GE DMS Go Operator's Manual page 73

2.3.3d Entering a New Password (CONFIG - PASSWORD) (cont.)
3. Move the joystick to the letter or number you want to enter; then press the center of the joystick (
these steps until you have entered the complete password, then press F2 (ENTER).
Note: In case you had a previous PASSWORD (OLD) system first asks you for the OLD PASSWORD before it allows you to enter the NEW
PASSWORD. The DMS Go also allows you to have NO PASSWORD. In this case there is no access.
4. After entering the password, use the joystick (
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to move to another function, or press HOME to return to the Main Menu.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 2. Instrument Setup
) to enter the character. Repeat
1-847-577-3980
Info@BergEng.com
51